110-315MM DOUBLE WALL CORRUGATED PIPE MACHINE
specification
1）Product use: water supply pipe
2）Recommended raw materials: qilu petrochemical, Shanghai petrochemical
3）Product color: black
4）Color-coded lines: 4
5）Product specification and pressure grade:
NO | Outer dis（mm） | SDR11 | SDR21 | Core bar qty | Sizing sleeve qty | Remarks |
1 | 110 | 1pc | 1 pc | 2 pc | 1 pc |
|
2 | 125 | 1 pc | 1 pc | 2 pc | 1 pc |
|
3 | 160 | 1 pc | 1 pc | 2 pc | 1 pc |
|
4 | 200 | 1 pc | 1 pc | 2 pc | 1 pc |
|
5 | 225 | 1 pc | 1 pc | 2 pc | 1 pc |
|
6 | 250 | 1 pc |
| |||
7 | 315 | 1 pc | 1 pc | 2 pc | 1 pc |
|
Above according to the customer thickness of the provisional size of 100 thick | ||||||
Note: the molds match the national standard to produce all kinds of pressure grade pipes in table 110---315
Using condition
ü power： | 3P380V（-10%，+5%）50Hz |
ü installed capacity： | Around 258KW |
ü Water consumption： | ≤20℃ ≥0.3Mpa 15m3/min |
ü compressed air： | ＞0.5Mpa |
ü overall length： | 35m |
General rules
The equipment is used to produce polyethylene pipe with marking line by compound extrusion.
l Resin used：polyethylene HDPE
l Extrusion output
Extruder model | Extrusion material | Extrusion output | Remarks |
SＪ１２０Ｂ×33 | PE | 240- ５００Kg/h | New materials |
| PE | ３００ Kg/h | New materials |
| PE | ６０Kg/h |
|
The extruding output may vary according to the different processing materials and operating conditions.
l Production Line Speed：0.3-3.5m/min（According to the wall thickness of products and different operations and the corresponding changes）
l Extrusion center height：1000mm
l Operation direction: from right to left
